Shopping

• Ford Hybrid Brake Bearing and Locknut Rotor Installation Kit
• OEM style kit includes inner bearing, outer bearing, dust cap, spindle nut, washer, cotter pin, and seal
• For popular Pinto/Granada style rotors, used in Modified Racing
• Compatible with Wilwood rotor #160-9240 installation

• Wilwood’s Compact Combination Master Cylinders have been designed for limited space applications requiring the output capacity of a full size master cylinder.
• The ultra short 3.37” compact body provides 2.16” of additional clearance between the mounting flange and the fluid outlet.
• A full 1.12” of piston stroke meets or exceeds the stroke capacity of most full size cylinders.
• With 1/8” NPT fluid outlet port located at the top radius of the cylinder bore, reduces the chances for trapped air.
• Enhanced fluid inlet port allows mounting of the standard reservoir included in kit and also contain 11/16-20 internal threads for custom reservoir arrangements.
• The black E-Coated aluminum body resists corrosion and maintains a durable long lasting finish.
• Bore Size: 1-1/8"
• Area (in²): 0.970
• Stroke: 1.12
• Volume (cu in): 1.01
• Outlets: 1
• Material: Aluminum / Plastic
• Finish: Black E-coat
• Reservoir Type: Remote
• Reservoir Size (oz): 10.0 or 7.0
• Reservoir Size(cu in): 18.0 or 12.6

This swinging mount pedal assembly combines the brake and clutch pedals in one unit with the master cylinders in a reverse position inside the firewall. It features a lightweight aluminum frame, with high strength reinforced I-Beam style forged 6.25:1 ratio pedal arms. The non-skid waffled pedal pads can be laterally adjusted for driver preference or clearance as necessary. The balance bar incorporates a positive detent stop every full turn to maintain adjustment position and driver awareness. A pin and clevis pushrod attachment system provides highest possible degree of misalignment angle for bind free operation through the entire range of travel. The balance bar can be locked in place with the included jam nut, or used with an optional remote cable for quick on-track adjustments. This pedal accepts any Wilwood vertical mount flange single outlet master cylinders that are ordered separately by style and bore size.

• Aluminum reverse swing amount pedal assembly with Black E-Coat finish
• Adjustable triple master cylinder
• Includes adjustable brake balance bar
• Fully adjustable aluminum pedal pads with waffle style non-slip surface
• High strength forged aluminum ladder style pedal arms
• Brake and clutch pedal have 6.25:1 ratio
• Both pedal lengths are 11.89"
• Mount length is 12.22"
• Easy mounting location with full interchangeability with Wilwood pedals of the same type and style
• Includes mounting studs, hardware, new clevis and pivot pin balance bar assembly

Wilwood’s Adjustable Forward Mount Pedal Assembly combines the brake and clutch pedals together in one unit and positions the master cylinders outside the firewall. It features all aluminum frame and forged aluminum pedal arms with ladder style construction. Pedal pads are of special adjustable design that allows fine-tuning of the pedal location and clearance. Also included with the assembly: mounting studs, hardware, new clevis and pivot pin balance bar assembly to provide smooth and accurate settings of the brake pedal bias. The balance bar can be set and locked down with the jam nut, or attached to a remote cable for quick on-track adjustments. With a 6.25 to 1 pedal ratio on both clutch and brake pedals.

• Aluminum forward swing amount pedal assembly
• Adjustable triple master cylinder
• Includes adjustable brake balance bar
• Fully adjustable aluminum pedal pads with waffle style non-slip surface
• High strength forged aluminum ladder style pedal arms
• Brake and clutch pedal have 6.25:1 ratio
• Both pedal lengths are 12.05"
• Easy mounting location with full interchangeability with Wilwood pedals of the same type and style
• Includes mounting studs, hardware, new clevis and pivot pin balance bar assembly

• Rotor adapter for Wilwood’s GEN II Sprint / Midget inboard hubs.
• Adapter has unique mounting 6 x 5.50” dynamic or fixed bolt pattern for rotor mounting.
• Made from high strength aluminum alloy with a corrosion and wear resistant Type III hard anodize finish.

• Bracket Kit - Wilwood Tandem Master Cylinder to Single Pedal Adapter
• Kit includes bracket, pushrod, boot, and hardware.
• Aluminum construction, Black anodized finish.

• Swing mount pedal mounts two single outlet brake master cylinders in reverse position inside the firewall
• Features a lightweight aluminum frame
• High strength reinforced I-Beam style forged 6.25:1 ratio pedal arm
• Non-skid waffled pedal pad can be laterally adjusted for driver preference or clearance
• Balance bar incorporates a positive detent stop every full turn to maintain adjustment position and driver awareness
• A pin and clevis pushrod attachment system provides highest possible degree of misalignment angle for bind free operation
• Balance bar can be locked in place with the included jam nut, or used with an optional remote cable for quick on-track adjustments
• Accepts any Wilwood vertical mount flange single outlet master cylinders that are ordered separately by style and bore size
• Pedal Length: 11.71
• Mount Length: 12.06

• Six different bore sizes
• Precision machined from high strength aluminum
• Kit includes both small and large size reservoirs
• Reservoirs can be mounted on the master cylinder or remotely
• Four different installation configurations
• Standard mounting bolt hole configurations
• Replacement parts available
• Click on our link below for Wilwood Installation Instructions

• High pressure die-cast bodies from high-grade aluminum
• High fluid capacity 8.2 ozs
• At least 26% more fluid volume
• 1-7/16" piston travel
• Heavy duty internal springs provide fast retraction
• Steel lids & gaskets keep fluid in & moisture out
• Mount from front or side